Users Currently Browsing This Topic:
Tom Mahon, Andrew Mason

Author Topic: Trying out methods used by Dale Myers  (Read 146 times)

Online Charles Collins

  • Hero Member
  • *****
  • Posts: 3947
Trying out methods used by Dale Myers
« on: February 21, 2025, 10:37:30 PM »
Advertisement
Andrew Mason asked how we are supposed to test Dale Myers' results from his animation. Dale explains his methods in detail. So I decided to give it the old college try. My tests are not near as precise as Dale's because I use generic character models and do not have anything nearly as accurate as Dale's model of Dealey Plaza. Please also note that the generic models do no have the ability to move the extremities or turn the heads. I tried to get the areas where the knots of the neckties would be to match as closely as I could reasonably do. Here is my first stab at this:

First I take a close up crop of the Z161 frame and match up the positions of the limo, and the two victims of the gun shots.




Then I have a "flyover" of the "camera" of the limo to give you some different perspectives of the seating positions.




Finally, here is the seating positions from the viewpoint of Croft at the Z161 point in time.




The seating positions are exactly the same throughout all of these clips. It appears to me therefore that these positions shown are very close to what they were on 11/22/63.
« Last Edit: February 21, 2025, 10:51:57 PM by Charles Collins »

JFK Assassination Forum

Trying out methods used by Dale Myers
« on: February 21, 2025, 10:37:30 PM »


Online Andrew Mason

  • Hero Member
  • *****
  • Posts: 1481
    • SPMLaw
Re: Trying out methods used by Dale Myers
« Reply #1 on: Today at 02:52:08 AM »
]

Finally, here is the seating positions from the viewpoint of Croft at the Z161 point in time.




The seating positions are exactly the same throughout all of these clips. It appears to me therefore that these positions shown are very close to what they were on 11/22/63.
Very well done Charles.
Accuracy depends on the model you are using for the car, particularly the relative distances between the back and front seats. Can you provide the dimensions with an overhead view?

Try matching their positions to this photo on Main St.:

Online Charles Collins

  • Hero Member
  • *****
  • Posts: 3947
Re: Trying out methods used by Dale Myers
« Reply #2 on: Today at 02:47:26 PM »
Very well done Charles.
Accuracy depends on the model you are using for the car, particularly the relative distances between the back and front seats. Can you provide the dimensions with an overhead view?

Try matching their positions to this photo on Main St.:


Thanks Andrew. I will see what I can do with your requests. First, here is an image from approximately directly overhead that shows the two figures and their positions. The limo is positioned so that it is going down the slope of Elm Street at the Z161 position. So this isn't exactly at the same angle as directly overhead, but it is reasonably close.



« Last Edit: Today at 02:48:13 PM by Charles Collins »

JFK Assassination Forum

Re: Trying out methods used by Dale Myers
« Reply #2 on: Today at 02:47:26 PM »