~snip~
Mr. Eisenberg: Was it reported to you by the person who ran the machine-run tests whether they had difficulties with sighting the weapon in?
Mr. Simmons: Well, they could not sight the weapon in using the telescope, and no attempt was made to sight it in using the iron sight. We did adjust the telescope sight by the addition of two shims, one which tended to adjust the azimuth, and one which adjusted an elevation.
~snip~
Mr. EISENBERG. How did he do with the iron sight on the third target?
Mr. SIMMONS. On the third target he missed the boards completely. And we have not checked this out. It appears that for the firing posture which Mr. Miller--Specialist Miller uses, the iron sight is not zeroed for him, since his impacts on the first and second targets were quite high, and against the third target we would assume that the projectile went over the top of the target, which extended only a few inches over the top of the silhouette.
Mr. EISENBERG. Mr. Simmons, were your marksmen instructed to aim at the three targets in consecutive order?
Mr. SIMMONS. The marksmen were instructed to take as much time as they desired at the first target, and then to fire--at the first target, being at 175 feet--to then fire at the target emplaced at 240 feet, and then at the one at 265 feet.
~snip~
Mr. Eisenberg: Do you think a marksman who is less than a highly skilled marksman under those conditions would be able to shoot in the range of 1.2 mil aiming error?
Mr. Simmons: Obviously considerable experience would have to be in one's back background to do so. And with this weapon, I think also considerable experience with this weapon, because of the amount of effort required to work the bolt.
~snip~