Users Currently Browsing This Topic:
0 Members

Author Topic: Z-317 shows no rearward blowout  (Read 13003 times)

Offline Dillon Rankine

  • Full Member
  • ***
  • Posts: 113
Z-317 shows no rearward blowout
« on: August 18, 2018, 05:29:35 PM »
Advertisement
Some (notably folks like Fetzer) have claimed that the nonexistence of a rearward blowout in Z317 proves the film was doctored, noting what they think is a ?black blob? on the rear of the head. Professor Hany Farid, author of a highly cited paper on detecting image forgery conducted a study using computational modelling* and demonstrated that the darkness manifest on the rear of the head is consistent with natural shadows, revealing no obvious lesion.

Read the paper, or review Fig. 7 on p. 8. https://www.cs.dartmouth.edu/farid/downloads/publications/tr10a.pdf

*For those who autonomically respond with ?Garbage In: Garbage Out,? note that this is academic paper and as such all values applied to the model and how they were determined can be found on pp. 2-6.

JFK Assassination Forum

Z-317 shows no rearward blowout
« on: August 18, 2018, 05:29:35 PM »


Offline Ray Mitcham

  • Hero Member
  • *****
  • Posts: 994
Re: Z-317 shows no rearward blowout
« Reply #1 on: August 18, 2018, 06:33:57 PM »
Some (notably folks like Fetzer) have claimed that the nonexistence of a rearward blowout in Z317 proves the film was doctored, noting what they think is a ?black blob? on the rear of the head. Professor Hany Farid, author of a highly cited paper on detecting image forgery conducted a study using computational modelling* and demonstrated that the darkness manifest on the rear of the head is consistent with natural shadows, revealing no obvious lesion.

Read the paper, or review Fig. 7 on p. 8. https://www.cs.dartmouth.edu/farid/downloads/publications/tr10a.pdf

*For those who autonomically respond with ?Garbage In: Garbage Out,? note that this is academic paper and as such all values applied to the model and how they were determined can be found on pp. 2-6.

Hary Farid did work for the gubermint. Enough said.

Offline Jerry Organ

  • Hero Member
  • *****
  • Posts: 2414
Re: Z-317 shows no rearward blowout
« Reply #2 on: August 18, 2018, 09:15:41 PM »
Hary Farid did work for the gubermint. Enough said.

Who do you think paid Cyril Wecht for most of his career?

JFK Assassination Forum

Re: Z-317 shows no rearward blowout
« Reply #2 on: August 18, 2018, 09:15:41 PM »


Offline Steve M. Galbraith

  • Hero Member
  • *****
  • Posts: 1500
Re: Z-317 shows no rearward blowout
« Reply #3 on: August 18, 2018, 09:32:14 PM »
Hary Farid did work for the gubermint. Enough said.

Of course. I'm a lone nutter and I went to "gubermint" schools.

We're everywhere.

If you did work for THE GOVERNMENT at any time then obviously you're in cahoots with THEM.


Offline John Mytton

  • Hero Member
  • *****
  • Posts: 4277
Re: Z-317 shows no rearward blowout
« Reply #4 on: August 19, 2018, 11:57:31 PM »
Hary Farid did work for the gubermint. Enough said.

Did you even look at his analysis, he didn't just say "Abracadabra" and come up with some biased paranoid conclusion(as above) but every step of his work is detailed and can be replicated by anybody to validate his results.

JohnM

JFK Assassination Forum

Re: Z-317 shows no rearward blowout
« Reply #4 on: August 19, 2018, 11:57:31 PM »


Offline Ray Mitcham

  • Hero Member
  • *****
  • Posts: 994
Re: Z-317 shows no rearward blowout
« Reply #5 on: August 21, 2018, 02:45:04 PM »
Did you even look at his analysis, he didn't just say "Abracadabra" and come up with some biased paranoid conclusion(as above) but every step of his work is detailed and can be replicated by anybody to validate his results.

JohnM

Why did he study just one photo?

And his report  is  based on poor conclusions.
"Hany Farid report3.3. Posture
?It has been argued that Oswald is leaning so far to the left as to be physically implausible. Our 3-D model allows for arbitrary views of Oswald?s body and measurements of his posture. Shown in Figure 7 are four renderings of Oswald?s body taken from the front, back, and left and right sides, each of which look qualitatively reasonable. The tilt of Oswald?s body was measured to be a physically plausible five degrees from vertical.?

Only problem is Farid was measuring the tilt on a photo which itself was out of tilt. On correcting the tilt, the angle that Oswald is standing is nearer to be a physically implausible 10˚ from vertical NOT 5˚.
« Last Edit: August 21, 2018, 04:07:28 PM by Ray Mitcham »

Offline Jerry Freeman

  • Hero Member
  • *****
  • Posts: 3724
Re: Z-317 shows no rearward blowout
« Reply #6 on: August 21, 2018, 07:23:10 PM »
The frame in question---------------------------


Offline John Iacoletti

  • Hero Member
  • *****
  • Posts: 10815
Re: Z-317 shows no rearward blowout
« Reply #7 on: August 21, 2018, 08:49:52 PM »
Why did he study just one photo?

And his report  is  based on poor conclusions.
"Hany Farid report3.3. Posture
?It has been argued that Oswald is leaning so far to the left as to be physically implausible. Our 3-D model allows for arbitrary views of Oswald?s body and measurements of his posture. Shown in Figure 7 are four renderings of Oswald?s body taken from the front, back, and left and right sides, each of which look qualitatively reasonable. The tilt of Oswald?s body was measured to be a physically plausible five degrees from vertical.?

Only problem is Farid was measuring the tilt on a photo which itself was out of tilt. On correcting the tilt, the angle that Oswald is standing is nearer to be a physically implausible 10˚ from vertical NOT 5˚.

"Look qualitatively reasonable".

How scientific.

JFK Assassination Forum

Re: Z-317 shows no rearward blowout
« Reply #7 on: August 21, 2018, 08:49:52 PM »