Users Currently Browsing This Topic:
0 Members

Author Topic: 3D Modeling  (Read 40723 times)

Offline Jerry Organ

  • Hero Member
  • *****
  • Posts: 2414
Re: 3D Modeling
« Reply #112 on: November 28, 2023, 05:14:51 PM »
Advertisement
The youtube video is interesting but appears flawed. It looks like they have made a number of false assumptions, and the end result is wrong. In addition to what John has pointed out, the shot did not take place at Z225, it took place at Z218 or earlier. It looks like they positioned LHO in the center of the double window not at all close to the east wall side. They are 1 to 2 feet off from where he was actually located. The first shot most likely took place with the rifle retracted into the room to avoid detection from the street below. He was likely located nearer the edge of the window by the East wall. Correcting these errors, I believe that would move JBC back to where he was actually sitting.

Unless there's been a clearer view posted, I think the firing origin in the center of the window may be an illusion, caused by the line-of-sight given and the "clever" use of too much transparency.

You need at least one of the two figures (JFK, JBC) visible to see his position, plus you'll get more of the limousine. I believe the SBT was earlier than Z223 (which is clearer than Z222), but would their positions have changed that much in two or three frames? If they did then no one can do a 3D study ever since we can't see through the sign.

JFK Assassination Forum

Re: 3D Modeling
« Reply #112 on: November 28, 2023, 05:14:51 PM »


Online Royell Storing

  • Hero Member
  • *****
  • Posts: 2775
Re: 3D Modeling
« Reply #113 on: November 28, 2023, 05:53:16 PM »
  People using the naked eye to view whatever generation images they post on their computer/TV Screen  vs  Knott Lab Laser 360 Scannings of Dealey Plaza in junction with computer evaluated still frames and photographs taken on 11/22/63.   The Neanderthals vs The Science.     
« Last Edit: November 28, 2023, 06:12:05 PM by Royell Storing »

Offline Jerry Organ

  • Hero Member
  • *****
  • Posts: 2414
Re: 3D Modeling
« Reply #114 on: November 28, 2023, 06:21:06 PM »
  People using the naked eye to view whatever generation images they post on their computer

What version of Zapruder frames did Knott use?

Quote
/TV Screen  vs  Knott Lab Laser 360 Scannings of Dealey Plaza in junction with computer evaluated still frames and photographs taken on 11/22/63.   The Neanderthals vs The Science.     

"Computer evaluated still frames and photographs"? LOL! You mean images that were scanned at some point by somebody (I would bet not Knott), put on the Internet and looked at on a computer monitor. Knott Lab said they used nothing more elaborate than photogrammetry. They said the only thing laser-scanned by them was the physical Plaza in its current state.


JFK Assassination Forum

Re: 3D Modeling
« Reply #114 on: November 28, 2023, 06:21:06 PM »


Online Royell Storing

  • Hero Member
  • *****
  • Posts: 2775
Re: 3D Modeling
« Reply #115 on: November 28, 2023, 06:57:06 PM »
What version of Zapruder frames did Knott use?

"Computer evaluated still frames and photographs"? LOL! You mean images that were scanned at some point by somebody (I would bet not Knott), put on the Internet and looked at on a computer monitor. Knott Lab said they used nothing more elaborate than photogrammetry. They said the only thing laser-scanned by them was the physical Plaza in its current state.

     You're on Tilt and flailing around like Dennis Hopper onna bender in "Hoosiers". You're better than this. Not a lot, but I have seen it. It's obvious you do Not know what Knott Lab did, and if you did, you wouldn't comprehend it. You're attempting what is known as, "Fighting above your weight". In your case, WAY above your weight. Just take a step back, draw a deep breath, and accept The Science.  SBT = DOA
« Last Edit: November 28, 2023, 07:00:35 PM by Royell Storing »

Offline John Mytton

  • Hero Member
  • *****
  • Posts: 4277
Re: 3D Modeling
« Reply #116 on: November 28, 2023, 08:30:06 PM »
in junction with computer evaluated still frames and photographs taken on 11/22/63.   

Hahaha.

Which stills and images? You're on record telling the entire World that the JFKA image record is unreliable. Hilarious.

Something is definitely Not Right with the Altgens photo.  JFK Assassination Photos & Films which are engulfed by Un-Explainable/Contrasting/or Missing Images are in abundance throughout this case.

Which stills and images? Because here again you are on record claiming any attempt to match-up images is futile, unless of course the images were being matched up by Knott Lab!? Laughable.

         Attempting to get ALL the JFK Assassination Images to match-up is futile. Doing so results in Chasing Your Tail which is a Mission Accomplished by those responsible for the image alteration we continue to see. There are JFK Assassination Images which are legit, and some are Bogus.   

And we know from their video that Knott lab used the Zapruder film "still" as the cornerstone of their match-up.

...corroborate the Current Z Film NOT depicting reality on 11/22/63.
 
Even though you inadvertently have supplied further Proof of the Current Z Film being Bogus,

The Blackest Hole in the Z Film, (and there are many),

   The Lead Runner is visible on the Z Film for only scant seconds. This Lead Runner is Not visible on Any other JFK Assassination Film or Any other JFK Assassination Image period. This gent would have been in front of the man we see on the Bell Film running toward Houston St.

   Possible "removed frames" does Not explain NO ONE at Parkland Hospital seeing the Massive Hole/Flap in the (R) Temple area. The ONLY Explanation for Not 1 Single Dr or 1 Single Nurse seeing the Massive Wound and/or blood trickling from it onto the hair of JFK is that the Wound DID NOT EXIST!

The Z Film is Not a portrait of Officer Chaney. It captured peripheral images vs that which researchers over the last 54+ years have foolishly & repeatedly Focused on.

My thought is the CIA had prepared a Z Film alteration

And this is only a small sample of the drivel about film/photo alteration you have been posting over the years, so this new found faith in Knott Labs reliance on the "still frames and photographs taken on 11/22/63" not only rings hollow but shows that you are truly the worst type of Troll.

 :D ;D :D ;D :D ;D :D ;D :D ;D :D ;D :D ;D

Better luck next time and please try harder, because this was way too easy!

JohnM

JFK Assassination Forum

Re: 3D Modeling
« Reply #116 on: November 28, 2023, 08:30:06 PM »


Online Royell Storing

  • Hero Member
  • *****
  • Posts: 2775
Re: 3D Modeling
« Reply #117 on: November 28, 2023, 09:28:05 PM »
  Ah yes, another member of the Dennis Hopper aka "Shooter" club staggers into the discussion. Waving his arms, and incoherently raging because The Science they claimed proved a LN was responsible for the assassination of JFK, has suddenly turned around and bit them in the arse. As The Science continues PROVING CONSPIRACY, comfort yourself in knowing that, "The TRUTH will set you free". LN's have been duped for 60 yrs. That's tough to accept, but for the sake of you and those around you, you need to stop the arm waving, curb your rage, and actually research Knott Lab Laser 360 Technology and how the US Justice System routinely uses this SCIENCE.   
« Last Edit: November 28, 2023, 09:29:01 PM by Royell Storing »

Offline John Mytton

  • Hero Member
  • *****
  • Posts: 4277
Re: 3D Modeling
« Reply #118 on: November 28, 2023, 09:51:17 PM »
  Ah yes, another member of the Dennis Hopper aka "Shooter" club staggers into the discussion. Waving his arms, and incoherently raging because The Science they claimed proved a LN was responsible for the assassination of JFK, has suddenly turned around and bit them in the arse. As The Science continues PROVING CONSPIRACY, comfort yourself in knowing that, "The TRUTH will set you free". LN's have been duped for 60 yrs. That's tough to accept, but for the sake of you and those around you, you need to stop the arm waving, curb your rage, and actually research Knott Lab Laser 360 Technology and how the US Justice System routinely uses this SCIENCE.   

Ironically if Knott Labs SBF work ever got to a court, I'd use Royell Storing's very own words to discredit it! High five!

JohnM


Online Royell Storing

  • Hero Member
  • *****
  • Posts: 2775
Re: 3D Modeling
« Reply #119 on: November 28, 2023, 10:17:50 PM »
Ironically if Knott Labs SBF work ever got to a court, I'd use Royell Storing's very own words to discredit it! High five!

JohnM

    You LN's are so stunned, you Fail to understand that Knott Labs was SOLELY FOCUSED on the SBT/Magic Bullet Trajectory and that this was ONLY STEP 1. Pull yourself together and actually research what Science is still revealing. You have been "played" for 60 yrs running.   

JFK Assassination Forum

Re: 3D Modeling
« Reply #119 on: November 28, 2023, 10:17:50 PM »